All researchProject overview

Wearable biomechanics · 2020–2024

Smart insoles for plantar pressure and temperature

Building and testing electronic and fibre-optic insoles for plantar monitoring, with follow-up work on graphene temperature sensors.

Qatar University · Qatar National Research Fund Undergraduate Research Experience Program and follow-on work

Three panels: a rendered 3D model of the insole with a spiral optical fibre, the assembled prototype with its fibre cable, and the optical and electronic insoles placed inside a pair of sneakers.
Figure 4 from Mahmud et al. (2023). (a) 3D model of the fibre Bragg grating insole, (b) the prototype used for data acquisition, and (c) the optical and electronic insoles side by side in a pair of sneakers.View full-size figureSource article© 2022 Elsevier B.V. · author reuse

Approach

Can low-cost electronic and fibre-optic insoles measure plantar pressure and temperature together for diabetic-foot monitoring?

The electronic design uses 16 pressure sensors and eight temperature sensors per insole with wireless data acquisition. The fibre Bragg grating design measures both quantities through an optical sensing system. We evaluated performance during static and walking tasks. Later work characterised laser-induced graphene sensors for plantar temperature mapping.

  1. Build electronic and fibre-optic insoles
  2. Test during standing and walking
  3. Compare with a commercial system

Reported results

The fibre-optic insole measured plantar pressure and temperature at the same time with reasonable precision and displayed foot pressure maps, temperature maps and gait-cycle plots in real time. Compared with a commercial plantar pressure system, it used far fewer sensors and cost more than eight times less to develop.

Two pairs of foot temperature heat maps for the left and right foot. The second pair, recorded after one hour, shows warmer regions than the first.
Figure 9 from Mahmud et al. (2023). Plantar temperature maps at the start of recording (a) and after one hour (b).View full-size figureSource article© 2022 Elsevier B.V. · author reuse

My contribution

I integrated sensors and worked on data acquisition, experiments and analysis for the electronic prototype. I led system development and evaluation for the fibre-optic insole and contributed to testing the graphene temperature sensors.

Study scope

These studies evaluate measurement prototypes in controlled experiments. Clinical detection of ulcer onset requires a longitudinal study.