Intelligent energy systems · 2023–2024
Broadband piezoelectric energy harvesting from rotating systems
A piezoelectric beam on a rotating disk, with magnetic coupling to widen the range of speeds at which it produces useful voltage.
Qatar University · Developed from an MSc course project · Qatar University grant IRCC-2020-017
Approach
Can magnetic coupling help a rotating piezoelectric harvester produce useful voltage across a wider operating range than a conventional narrowband design?
Low-power wireless sensors need long-lasting power sources, but conventional vibration harvesters respond well only in a narrow frequency band. That limits long-term use when operating conditions change. Rotating systems behave nonlinearly, which can be exploited to widen this band. This study placed a piezoelectric harvester on one side of a rotating disk and examined whether gravity and magnetic couplers at the ends of the beam could broaden its response and raise its voltage output.
- Model the coupled beam
- Simulate mode shapes and output
- Compare coupled and uncoupled designs
Magnetically coupled harvester on a rotating disk
Book chapter · 2024
The harvester uses a beam with a macro-fiber composite, a flexible piezoelectric layer that converts bending into voltage. As the disk turns, gravity and magnetic couplers at the beam ends add nonlinear forces that shape how the beam vibrates.
An analytical model derived from Euler–Bernoulli beam theory described the magnetically coupled structure. Finite element analysis then examined the beam’s mode shapes and estimated the output of the rotational harvester.
Adding the magnetic couplers broadened the operating bandwidth. With an optimal separation distance between the magnets, the coupled models reached a maximum output of 1.3 V at speeds of up to 3,000 rpm.
- Maximum voltage from the coupled models
- 1.3 V
- Rotation speeds considered, up to
- 3,000 rpm
| Role | |
|---|---|
| Rotating disk | Supplies the motion, with gravity acting on the beam as it turns |
| Macro-fiber composite beam | Converts beam bending into electrical voltage |
| Magnetic couplers | Add coupling at the beam ends to broaden the bandwidth and raise the voltage |
| Analytical and finite element models | Describe the coupled dynamics, mode shapes and expected output |
My contribution
I contributed to the technical analysis of the harvesting concept, interpretation of the results and manuscript review.
Study scope
The reported output comes from the study’s models and design settings. Performance in a deployed rotating system would depend on its speed range and operating conditions.
Publications
- Rotational Vibration-Based Piezoelectric Energy Harvesting with Bandwidth Enhancement Through Magnetic OscillatorsProceedings of Ninth International Congress on Information and Communication Technology · 2024